Comelit 41LED032 Manuel Technique page 8

MODULE COMPONENTS
1. LED Outputs from 1 to 16*
2. LED Outputs from 17 to 32*
3. "GND" Terminals for realizing common-cathode circuit type.
4. "+12V" Terminals for realizing common-anode circuit type.
5. Loop connection terminals.
6. Terminals for connection of external power supply 12-24 VDC.
7. Special LED outputs:
◊ "FIRE" - Repeating the LED indication for a fire alarm event from the fire panel**.
◊ "FLT" - Repeating the LED indication for a fault event from the fire panel**.
◊ "DSBL" - Repeating the LED indication for a disablement event from the fire panel**.
◊ "PWL" - Indicates that the mimic panel is supplied with power.
8. Special Inputs (for connecting 1 or 2 position key switch/button for operation):
◊ "KEY LOCK" - Enables the RESET and SILENCE ALARM controls.
◊ "TEST" - Activation of all LED outputs and internal buzzer of the module.
◊ "SILENCE BUZZER" - Silence the internal buzzer of the module.
◊ "RESET" - Resets the fire panel**.
◊ "SILENCE ALARM" - Silences the sounders on the fire panel**.
9. "CA/CC" Jumper:
◊ Removed (OFF) - Common-anode circuit type is set
◊ Set (ON) - Common-cathode circuit type is set
10. Status LED
11. Mounting holes
* Note: Each output is equipped with a built-in compensation resistor (Ri). The Ri value is common for all LED outputs.
** Note: The fire panel to which the mimic panel is connected.
41LED032