Required Accessories - Reely Stagger Notice D'emploi

5. Required accessories

The "Stagger" buggy is supplied as a kit and must be assembled before the first use. For this purpose, the kit also
comes with separate assembly instructions with many assembly drawings. These instructions contain important tips
and recommendations for proper assembly of the model.
Important!
The individual parts found in the respective assembly drawings are packed separately. Only open the bags
just before assembling the parts.
For assembly, you can use standard tools such as a screwdriver, needle-nose pliers or a hexagon socket wrench.
However, you should always use suitable screwdrivers to avoid damaging the screw heads during assembly.
Practical tips:
A model vehicle stand has proven itself an effective aid in assembling the vehicle (especially for subse-
quent assembly steps). In addition to easy assembly, the stand can be used later for trial runs of the drive
mechanism or for maintenance purposes.
For operation of the model vehicle, the following accessories are required that are not included and must be
ordered separately:
• Remote control with transmitter and receiver (at least 2 channels)
• Steering servo (recommended: min. 4 kg)
• Electric motor (recommended: Brushed electric motor, type 550, 13 turns or brushless electric motor, type 3652,
3000 KV)
• Speed controller (recommended: 40 A continuous current, depending on the motor used)
• Drive battery (recommended: Racingpack version, LiPo or NiMH, depending on the speed controller/motor used)
• Batteries or rechargeable batteries for the remote control
• Suitable charger for transmitter and drive rechargeable batteries
For best results, we also recommend the following components:
• Spare tyres (in order to quickly change worn/damaged tyres)
• Compressed air spray for cleaning
• Thread-locking fluid
• Carry bag
39