Bosch GTA47W Consignes De Fonctionnement/Sécurité page 9

2610047964.qxp_GTA47W 6/29/17 10:57 AM Page 9
FIG. 10
Lowering Stand to its Lowest Position
Begin with the stand in the locked upright
position, as shown above in figure 11.
Firmly grip the handle with both hands and
place one foot against the kick bar C. Pull
back on the handle and lower the stand to
the ground, as shown (Fig. 12).
To Level Stand
The stand is equipped with two adjustable
feet for leveling the stand.
Adjust the height of the foot (See Fig. 13):
1. Loosen the top wing nut X.
2. Adjust the height of the foot by raising or
lowering the bottom wing nut Y.
3. Retighten both wing nuts securely once
the stand is level.
FIG. 11
C
FIG. 13
-9-
FIG. 12
X
Y