SEFRAM 7805B Manuel D'utilisation page 24

How to use SeframSat
Set SeframSat software depending on the appliance you are using :
« Instruments » permits to choose the target appliance.
« Port » permits to choose the COM port where the appliance is installed (see paragraph « connecting
the appliance to a PC » : Erreur! Source du renvoi introuvable.).
The different controls permitted by SeframSat are :
« File » then « Open » permits to open a *.sat that includes a satellite list.
« File » then « Save » permits to save all the defined satellites.
SeframSat permits to characterize completely one or several satellites : each parameter can be modified
either directly by keyboarding its value or by selecting from a drop-down list.
Example : How to send the « europe.sat » file to the 7855 appliance.
-Click on « instrument » and tick « 7851-7856 »
-Click on « port » and select the right COM port.
-Click on « file-> open » and search for the « europe.sat » file.
-Click on to transmit the satellite list to the appliance.
– 7805B –
p. 24
Sends the list of
satellites contained in
the appliance to
SeframSat software.
Sends the list of
satellites contained
in SeframSat
software to the
Addition of a
satellite to the
t
Deletes the selected
satellite from the
current map.