Using The Charger For The First Time; The Operation Of The Charger Is About Four Buttons - XciteRC X-pert Charger X50 Mode D'emploi

EN
EH / PQ / TP

Using the charger for the first time

Connect the included power cord to the charger, then connect the charger to an electrical outlet with 100-
240 V AC. Or connect the charger via the mini jack cable with a 12 V car battery or a power supply with 11-18
V DC and min. 100 W power output.
WARNING: Connect only one input at the same time, never plug an AC voltage to the 12 V DC input
or a DC voltage to the 100 - 240 V AC - fire hazard!

The operation of the charger is about four buttons:

TYPE STOP
DEC
INC
START ENTER
Battery
type
NiCd/NiMH
Li-Ion
LiPo
LiFe
Pb
16
XH
XH
Select battery type / Stop charging
up / increase value
down / decrease value
Confirm Parameter / Start charging
Voltage per cell
1.2 V
3.6 V (or 3.7 V - check
battery sticker!)
3.7 V
3.3 V
2.0 V
Using the charger for the first time
End of charging Fast
voltage per cell charge
1 - 2 C
4.1 V (4.2 V) max.
1 C
4.2 V 1 - 2 C
3.6 V 1 - 4 C
2.46 V 1 C
End point voltage per cell
NiCd: 0.85 V - NiMH: 1.0 V
2.5 V
3.0 V
2.0 V
1.75 V
X-pert Charger X50