Renson CAMARGUE SKYE 2.0 Manuel D'utilisation page 130

3. Configure your products
A. Log on to TaHoma's web interface (www.somfy-connect.com).
Follow the onscreen instructions to add applications.
Go to the main menu and press configuration.
B. Select the technology of the device you wish to add.
The optional Fixscreen, LED lighting and heating are io by default with Skye.
Select the io tab and then press «add».
C. Select the type of device you wish to add and then press «ok».
Fixscreen, LED-lighting and heating are «applications».
Select «applications» and press «ok».
Note: Any time, you can go back to the settings to add, change or remove applications.
D. To detect an application (Fixscreen, LED, heating), first of all select the current transmitter which control this application.
Normally, this will be a Situo io transmitter. Then press «continue.
E. Select the channel on the transmitter of the application you wish to detect.
Then press the PROG-button on the back of the transmitter control for 2 seconds.
130
A
C D
B
E
2 sec.