Renson CAMARGUE SKYE 2.0 Manuel D'utilisation page 121

Electrical
∫ Disconnect the covering from the po-
wer supply or block the various ele-
ments in the app during inspection or
maintenance (page 128).
∫ Frequent successive operation can
cause the motor to overheat. The in-
ternal thermal safety will temporarily
render the system inoperable (about 10
minutes).
∫ Do NOT let children play with the con-
trols.
∫ Changes to the electrical part can only
be made after approval of the manu-
facturer.
Wind class
According to the quality of the product, Camargue Skye can handle wind speeds of
120 km/h (> 11 bft) when stacked. The blades can be operated in winds up to 60
km/h.
For your information, here are the wind classes according to DIN 13561:2015.
Wind class Wind force (according to the Beaufort scale)
Class 0 Product not tested or non-compliant
Class 1 4 bft
Class 2 5 bft
Class 3 6 bft
Class 4 7 bft
Class 5 8 bft
Class 6 9 bft
10 bft
11 bft
12 bft
The vertical sunscreens are conformable to wind class 2.
The vertical Fixscreens must be rolled up with wind speeds of over 60 km/h.
For a stand-alone Camargue Skye, the warranty for wind loads of up to 120 km/h only
applies to cast or rein forced mounting bases.
Electrical specifications
BLADED ROOF
Supply voltage
Power range transformer
Power transformer
Motor voltage
Maximal motor current
Protection class
Maximum runtime during continuous use
Circuit breaker
VERTICAL FIXSCREEN
Supply voltage
Current intensity
Power
Protection class
Maximum runtime
HEATING
Power
Current intensity
Circuit breaker
AUDIO
Speakers
Wind speed
20 - 28 km/h
29 - 38 km/h
39 - 49 km/h
50 - 61 km/h
62 - 74 km/h
75 - 88 km/h
89 - 102 km/h
103 - 117 km/h
> 117 km/h
Value
230 Volts AC, 50 Hz
0 - 3.5 Amps
2 x 150 W
24 Volts DC
6 Amps
IP 65
Approx. 10 minutes
16 A curve C
230 Volts AC, 50 Hz
0.8 - 1.2 Amps (according to motor type)
170 to 270 Watts (according to motor type)
IP 44
Approx. 3 - 5 minutes
2400 W
12 A / heat - IP 65
20 A curve C
4 Ohms Marine Speakers - IP 65
120 W peak power
Freq: 90 Hz - 22 kHz
Water flow rate
The Camargue Skye covering has
a max. deposition flow rate of 180
mm/h, for max. 2 min.
This type of rain shower occurs
approx. every 15 years (Cf. Bel-
gian rain statistics: standard NBN
B 52-011.
Bearing capacity
Terrace coverings are subject to
different forces (e.g. snow). The
warranty is determined by static
strength calculations carried out
by our engineers and validated by
internal tests.
Here are a few examples:
∫ 6000 x 4000 mm 55 kg/m²
∫ 5835 x 3375 mm 110 kg/m² 2160 kg
You will not have damage or per-
manent deformation at these loads.
We do recommend to open the
roof in case of snowfall (blades
in vertical position, preferably
stacked).
EN
1320 kg
121