Renson CAMARGUE SKYE 2.0 Manuel D'utilisation page 128

Roof control (with Renson Skye app)
1. Start the Renson Skye app. The installed roof parts will appear automatically.
2. Select the desired roof part if there are multiple roof parts.
3. Select the desired position of the roof.
➊
Slide
Rotate
Fully open
All Skye
Skye 1
Slide
17°C, Light rain
Rotate
Fully open
Light
All Skye
4 lights
17°C, Light rain
Skye 1
Light
Roof
4 lights
1 roof
Slide
Slide
Roof
Slide
Rotate
1 roof
Rotate
Rotate
Fully open
Fully open
Fully open
All Skye
All Skye
All Skye
Skye 1
Skye 1
Skye 1
Slide
Rotate
Fully open
All Skye
Skye 1
Slide
Rotate
Fully open
All Skye
Skye 1
Slide
Slide
Rotate
Rotate
Fully open
Fully open
All Skye
All Skye
Skye 1
Skye 1
128
➋
Home
Hello
Home
1°C, snow
Hello
OPEN
Roof 1
CLOSE
1 Roof
1°C, snow
OPEN
OPEN
Roof 2
Roof 1
CLOSE
1 Roof CLOSE
1 Roof
OPEN
Roof 2
CLOSE
1 Roof
ON
Current weather according to your location
OFF
Grouping of all Skye roofs
ON
OPEN
With the 2 right buttons you can easily open or close all roofs. Works over all roof parts.
OFF
CLOSE
Movement of the roof is also indicated here in a narrow white beam.
OPEN
Sliding the blades on/off
CLOSE Rotating the blades
Completely open the roof
Slide blades on or off in the vertical position.
Intermediate position is also possible by dragging the white indicator.
The blades rotate at the desired angle by dragging the white indicator to the desired
position.
Blocking the roof
You can lock the roof by clicking on the lock symbol. If the roof is locked, it will not move
under any circumstances. So when you are cleaning/maintaining the Skye for example,
unwanted movements of the roof can be avoided.
Also if you want to keep the roof in a certain position for a longer period during the winter,
you can block the roof.
Attention: All movements are blocked, so also possible actions due to too much wind,
snow,...
Stop the movement of the roof
Control all roofs simultaneously
Control a roof individually
➌
Roof
Slide Rotate
Fully close
Roof
Slide Rotate
Fully close