Control panel and touch buttons
The control panel and touch buttons are located under the flip-up lid (see Step 2 "Starting up the
unit"). A grey circle around a touch button indicates that it is inactive. When the unit is turned on, all
touch buttons except the air flow speed control button, dim down after 20 seconds. Tap the control
panel and the touch buttons will light up again.
Classic 405 control panel touch buttons
FILTER
Wi-Fi
Wi-Fi
Status grey - OFF (no Wi-Fi)
Status "blinking" - no connection.
Wi-Fi ready to be connected.
Status grey and blue
Wi-Fi connected
Air flow speed control
Status grey - OFF
Status blue and all bars are grey -
the power cable is plugged in.
Status 1 blue bar - minimum speed
Status 2 blue bars - medium speed
Status 3 blue bars - maximum speed
Filter
Status grey and blue -no replacement
filter currently needed.
Status orange - replace filter and
reset by pressing down for 5 seconds.
9