Changing The Filters - Blueair Classic 400 Serie Guide D'utilisation

IMPORTANT!
Always turn off and disconnect the unit from the supply mains before changing filters, cleaning
or carrying out maintenance

Changing the filters

Step 1
Open the back door.
Step 3
Vacuum inside the
unit with a soft brush
attachment.
Step 5
Close the back door,
plug in the unit and
turn on.
The unit is now ready
for use.
12
procedures..
Step 2
Slide out the filter.
Step 4
Slide the replacement
Blueair filter back into
the unit.
Status orange - replace filter and
reset by pressing down for 5 seconds.