Placing The Unit; Getting Started; Control Panel And Touch Buttons - Blueair Classic 400 Série Guide D'utilisation

Placing the unit

Place the unit in a location where air can cir-
culate freely in, out and around the unit.
Do not place the unit closer than 4" (10 cm)
4 ins
from another object.
10 cm
Do not place the unit directly on or against
soft furnishings such as bedding or linen.

Getting started

Connecting your air purifier - 480i and 405
Follow the instructions below to connect your air purifier to your Blueair Friend mobile app. You can
then enable remote control.
Step 1
Plug the fixed power cable into a grounded
wall outlet. If you have a unit with a remov-
able power cable, then plug the cable firmly
and completely into the recessed power
cable socket located at the bottom of the
unit before plugging the other end of the
power cable into a grounded wall outlet.
Open the flip-up lid and press the airflow speed touch button. When the Wi-Fi symbol starts to blink,
the air purifier can be paired with the Blueair Friend mobile app.
Step 2
Download the Blueair Friend mobile app to your smartphone from your app store (Apple App Store
or Google Play).
Step 3
Connect your unit to your Blueair Friend mobile app. Start the app and follow the instructions.
After connecting your air purifier to the Blueair Friend mobile app, you can use the app to control the
unit remotely and adjust settings.
8
Do not place the unit near sources of heat,
such as radiators, fireplaces or ovens.
Do not place the unit near wet areas, such
as bathrooms or laundry rooms where it
may come into contact with water.
Do not place the unit outdoors
Blinking
Wi-Fi FILTER
Blinking
VOC PM 2.5
Wi-Fi FILTER AUTO

Control panel and touch buttons

The control panel and touch buttons are located under the flip-up lid (see Step 2 "Starting up the
unit"). A grey circle around a touch button indicates that it is inactive. When the unit is turned on, all
touch buttons on the control panel (except for airflow speed control); will dim down after 20 seconds.
Tap the control panel and the touch buttons will light up again.
Classic 405 control panel touch buttons
Wi-Fi FILTER
Wi-Fi
Status grey - OFF (no Wi-Fi)
Status "blinking" - no connection.
Wi-Fi ready to be connected.
Status grey and blue
Wi-Fi connected
Air flow speed control
Status grey - OFF
Status blue and all bars are grey -
the power cable is plugged in.
Status 1 blue bar - minimum speed
Status 2 blue bars - medium speed
Status 3 blue bars - maximum speed
Filter
Status grey and blue -no replacement
filter currently needed.
Status orange - replace filter and
reset by pressing down for 5 seconds.
9