Warranty; Safety Instructions - Becker CentronicPLUS Notice De Montage Et D'utilisation

Structural modifications and incorrect installation which are not in accordance with
these and our other instructions can result in serious injuries, e.g., crushing of limbs.
Therefore, structural modifications may only be carried out with our prior approval and
strictly in accordance with our instructions, particularly the information contained in
these Assembly and Operating Instructions.
Any further processing of the products which does not comply with their intended use is
not permitted.
The end product manufacturer and fitter have to ensure that all the relevant current
statutory, official and, in particular, EMC regulations are adhered to during utilisation of
our products, especially with regard to end product manufacture, installation and cus-
tomer advice.
General information
• Please keep the instruction manual safe!
• Only use unmodified original parts from the control unit manufacturer.
• Keep children away from control units.
• Observe all pertinent country-specific regulations.
• Always keep the sensor clean and free of leaves, snow, etc., and check it regularly
to make sure it is in perfect working order.
• Sudden gusts of wind may damage the system despite wind monitoring because
the shading solution cannot be retracted suddenly due to the inertia of the overall
system. If a storm is brewing, make sure that the shading solution is retracted and
is secured in this position.
Caution
• Risk of injury due to electric shock.
• Connections to the 230 V mains must always be per-
formed by an authorised specialist.
• Disconnect the connecting cable from the power prior to
installation.
• Keep people out of the system's range of travel.
• If the system is controlled by one or more transmitters,
the system's range of travel must always be visible dur-
ing operation.
18 - en

Warranty

Safety instructions