Publicité
Les langues disponibles
Les langues disponibles
Steering Wheel
Steering Wheel Axle
Do not over-tighten your track.
The adjustment of the track and
the brakes are linked. The braking
power will lessen the more the track
is tightened.
If the adjustment bolt has no more
adjustment left, the tracks may have
to be replaced.
Replacing Tracks
Check the condition of the tracks periodically.
If any track is cracked or frayed, it should be
replaced as soon as convenient.
1.
Lift up the hopper and insert a support rod
for safety purposes.
Lift the machine and set it on blocks
2.
o r s u p p o r t s r a t e d f o r t h e w e i g h t o f
t h e m a c h i n e s o t h a t t h e t r a c k s a r e
approximately 4" off the ground.
Danger Area
Support Object
3.
Loosen the adjusting bolts and pull the
steering wheel axle toward the engine, then
track will be loosen.
4.
Pull out the whole track.
Support Rod
Engine Maintenance
Refer to the Engine Manual included in
your unit
maintenance. Your engine manual provides
detailed information and a maintenance
schedule for performing the tasks.
Steering Wheel
Steering Wheel Axle
Adjusting Bolt
When removing or installing the
tracks, be careful not to get your
fingers caught between the track
and pulley.
for the information on engine
MINI TRACKED DUMPER
GB
17
Publicité
