Publicité
Les langues disponibles
Les langues disponibles
Adjustment Nut
Jam Nut
Lock Nut
2
Adjustment Nut
If the above adjustment does not create
enough cable tension, follow the steps below:
1.
Loosen the jam nut by turning it counter
clockwise with 12mm wrench.
2.
Tighten or loosen the cable by turning the
cable adjustment nut clockwise or counter
clockwise with 10mm wrench until you
have reached your required tightness.
Once tightness is set, return the jam nut
3.
against the handle to hold the cable in place.
Jam Nut
Adjustment Nut
2
Adjustment Nut
Replacing Drive Belt
Remove the belt covers as show.
1
Jam Nut
Lock Nut
3
Jam Nut
Lock Nut
1
Lock Nut
Jam Nut
3
Jam Nut
M8×20
(×4)
Belt Cover for Gearbox Pulley
Loosen the two bolts M8X25 and one bolt
5/16X30 that fix the two belt blockers, no
need to remove them. Pull out the belt.
M8 × 25
Gearbox Pulley
You may need to loosen the belt
guide bracket and slide back before
removing belt.
Lubrication
General Lubrication
Lightly lubricate all moving parts of the
machine at end of the season or every 25
operating hours.
MINI TRACKED DUMPER
Belt Cover
M6×20
M8 × 25
5/16 × 30
Drive Belt
GB
15
Publicité
