Publicité
Les langues disponibles
Les langues disponibles
GB
Never use choke to stop engine.
Clutch Control Lever
Squeeze the control lever, clutch engaged.
Release the lever, clutch disengaged.
Add Oil To Engine
No oil in the engine originally, but
a bottle of engine oil is in scope
of delivery. Don't start the engine
before adding oil.
1.
Make sure the power trackbarrow is on a
flat, level surface.
2.
Remove the oil fill cap/dipstick to add oil.
3.
Using a funnel, add oil up to the FULL mark
on the dipstick. (See engine manual for oil
capacity, oil recommendation, and location
of fill cap.)
DO NOT OVERFILL. Check engine
oil level daily and add as needed.
Add Gasoline To Engine
Gasoline is highly flammable and
explosive. You can be burned or
seriously injured when handling fuel.
Use extreme care when handling
gasoline.
Fill the fuel tank outdoors, never
indoors. Gasoline vapors can ignite
if they collect inside an enclosure.
Explosion can result.
MINI TRACKED DUMPER
12
Operation
OPEN
CLOSED
1.
The engine must be off and allowed to cool
at least two minutes before adding fuel.
2.
Remove the fuel filler cap and fill the tank.
(See engine manual for fuel capacity, fuel
recommendation, and location of fuel cap.)
IMPORTANT: DO NOT OVERFILL!
This equipment and/or its engine
may include evaporative emissions
c o n t r o l s y s t e m c o m p o n e n t s ,
r e q u i r e d t o m e e t E P A a n d /
o r C A R B r e g u l a t i o n s , t h a t w i l l
only function properly when the
fuel tank has been filled to the
recommended level. Overfilling
m a y c a u s e p e r m a n e n t d a m a g e
to evaporative emissions control
s y s t e m c om p on e n t s . F i l l i n g t o
the recommended level ensures
a vapor gap required to allow for
fuel expansion. Pay close attention
while filling the fuel tank to ensure
that the recommended fuel level
inside the tank is not exceeded. Use
a portable gasoline container with
an appropriately sized dispensing
spout when filling the tank. Do not
use a funnel or other device that
obstructs the view of the tank filling
process.
3.
Reinstall the fuel cap and tighten. Always
clean up spilled fuel.
Starting Engine
1.
Move the engine switch to the ON position.
OFF
ON
2.
Open the fuel shut-off valve.
OFF
ON
Publicité
