Publicité
Les langues disponibles
Les langues disponibles
CONTENTS SUPPLIED
GB
The mini tracked dumper comes partially
assembled and is shipped in carefully packed
package. After all the parts have been
removed from the package, you should have:
1. Handles
2. Machine
3. Gas Spring (Optional)
4. Tools for Spark Plug Assembly
5. Operator's Manual & Engine Manual
6. Hardware Bag, Including
Following the assembly directions below, you
will assemble the machine in a few minutes.
Handlebar Assembly
Align the holes of the handlebar with the
mount bracket and secure each with a spring
washer, flat washer and a M10x20 bolt. Fasten
each handlebar support onto the engine deck
with a spring washer, flat washer and a M8x25
hex bolt.
MINI TRACKED DUMPER
8
3
5
M10 X 20
X 4
A
M8 X 25
X 2
B
M8 X 35
X 2
ASSEMBLY
1
2
4
Gas Spring (Optional)
6
Lift up the hopper and insert a support rod for
safety purpose. Align the holes in the gas spring
with the holes in both guide brackets and insert
M8x35 bolts, washers and nuts to tighten.
Guide Bracket
Engine Oil
OIL HAS BEEN DRAINED FOR SHIPPING.
Failure to fill engine sump with oil before
starting engine will result in permanent
damage and void engine warranty.
Add oil according to Engine Manual packed
separately with your track dumper.
M10 X 20
M8 X 25
Gas Spring
Support Rod
Danger Area
M8 X 35
X 4
A
X 2
B
X 2
Publicité
