WIKA CPH62I0 Mode D'emploi page 20

6. Commissioning, operation
6.2 Main menu
GB
(ring - shift)
* appears only if data (Func-STOR) is in the logger memory.
** appears only if the logger memory is empty (see chapter "6.4 Operation of logger").
20
(2 sec)
Read*
Logg
Set
Conf
Set
CAL
Set
AL
Set**
Logg
Set
Cloc
Stored data*
Recall of individually logged data and respective
time stamp (´Func-STOR´ configuration (see
chapter "6.4 Operation of logger").
Configuration
Unit** / Sea-Level** / Measuring rate** /
Power-off / interface-address
Calibration
Adjustment of zero and span
Alarm
Min/Max alarm visual
Logger**
Switch from simple 'Hold' to 'Logger' function:
Single-point values (STOR) or Cyclic (CYCL)
System-clock
time / day & month / year
set parameter next parameter
WIKA operating instructions, model CPH62I0
store & quit