Window Installation Kit - mundoclima MUPO-12-H9 Manuel D'installation & D'utilisation

Installation

Window Installation Kit

Step One: Preparing the Exhaust Hose assembly
Press the exhaust hose into the window slider adaptor
and unit adaptor, clamp automatically by elastic buckles
of the adaptors.
Step Two: Install the Exhaust hose assembly to the unit
Insert unit adaptor of the Exhaust hose assembly into the
lower groove of the air outlet of the unit while the hook of
the adaptor is aligned with the hole seat of the air outlet
and slide down the Exhaust hose assembly along the arrow
direction for installation.
Step Three: Preparing the Adjustable Window Slider
1. Depending on the size of your window, adjust the size of the
window slider.
2. If the length of the window requires two window sliders, use the bolt
to fasten the window sliders once they are adjusted to the proper
length.
3. For some models, if the length of the window requires three window
sliders(optional), use two bolts to fasten the window sliders once they
are adjusted to proper length.
Note: Once the Exhaust Hose assembly and Adjustable Window Slider
are prepared, choose from one of the following installation methods.
Hung Window or Sliding Window Installation (optional)
Foam seal B
(Adhesive type-shorter)
Foam seal A
(Adhesive type)
1.Cut the adhesive foam seal A and B strips to the
proper lengths, and attach them to the window sash
and frame as shown.
Window slider B
Window slider A
(if required)
Foam seal B
(Adhesive type-shorter)
or
Foam seal A
(Adhesive type)
Window slider B
or (if required)
Window slider A
Exhaust hose
Press into Press into
Window slider
adaptor
Unit adaptor
Make sure the hook of the adaptor is aligned
with the hole seat of the air outlet.
Hook
Lower groove
adaptor
or
Window slider A Window slider B Window slider C
2.Insert the window slider assembly into the window opening.
Foam seal C
(Non-adhesive type)
3.Cut the non-adhesive foam seal C strip to match the width of the
window. Insert the seal between the glass and the window frame to
prevent air and insects from getting into the room.
Security Bracket
2 Screws
4.If desired, install the security bracket with 2 screws as shown.
37
Exhaust hose
assembly
Hole Seat
Make sure the adaptor is
inserted into the lower
groove of the air outlet.
Bolt
Window slider A Window slider B
Bolts
Foam seal C
(Non-adhesive type)
or
Security
Bracket
or
2 Screws
or