mundoclima MUPO-12-H9 Manuel D'installation & D'utilisation page 47

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

TEMP Button
:
1
temperature setting.
TEMP Button
2
temperature setting .
MODE Selection Button:
3
operation mode is shifted in the direction of the arrow:
AUTO
NOTE:
COOL only model has no HEAT feature.
4
SWING Button:
swing feature of the horizontal louver. Push it again to stop.
RESET Button:
5
all current settings are cancelled and the control will return to
the initial settings.
6
AIR DIRECTION Button:
angle of the louver. The swing angle of the louver is 6 for
each press. When the louver swing at a certain angle which
would affect the cooling and heating effect of the air conditioner,
it would automatically change the swing direction . No symbol
will appear in the display area when press this button. (Not
applicable to units without this function).
LED DISPLAY Button:
7
display in the air conditioner, press it again to activate it (Not
available for the units without LED display window).
FAN SPEED Button:
8
AUTO LOW
the fan speed mode is shifted.
ON/OFF Button:
9
button again to stop operation.
TIMER ON Button:
10
sequence. Each press will increase the auto-timed setting in 30
minutes increments. When the setting time displays 10, each
press will increase the auto-timed setting 60 minutes increments.
To cancel the auto-timed program, simply adjust the auto-on time
to 0.0.
SLEEP Button:
11
operation mode. Press it again to cancel. This function is only
can be used on COOL, HEAT and AUTO mode and maintain the
most comfortable temperature for you.
Push this button to decrease the indoor
:
Push this button to increase the indoor
Each time the button is pressed, the
COOL
DRY
Push this switch button to activate auto
When you press the recessed RESET button,
Press this button to change the swing
Press this button to clear the digit
Used to select the Fan Speed in four steps-
MED or HIGH. Each time the button is pressed,
Push this button to start operation, push the
Press this button to initiate the auto-on time
Press this button to go into the Energy-Saving
47
FAN
HEAT
o

Publicité

Table des Matières
loading

Table des Matières