mundoclima MUPO-12-H9 Manuel D'installation & D'utilisation page 48

TIMER OFF Button:
12
sequence. Each press will increase the auto-timed setting in 30
minutes increments. When the setting time displays 10, each
press will increase the auto-timed setting 60 minutes increments.
To cancel the auto-timed program, simply adjust the auto-off time
to 0.0.
LOCK Button:
13
current settings are locked in and the remote controller does not
accept any operation except that of the LOCK. Press again to
cancel the LOCK mode.
14 TURBO Button:
function which enables the unit to reach the preset temperature in
the shortest time.On cooling mode, the unit will blow strong cooling
air with super high fan speed. On heating mode (applicable to the
unit adopts PTC only), the PTC will bring fast heating operation.
15
CLEAN AIR Button(on some models):
the Ionizer or Plasma Dust Collector(depending on models) is
energized and will help to remove pollen and impurities from
the air.
Indicators on Display Panel
1
DIGITAL
DISPLAY area
TRANSMI-
2
SSION Indicator
OPERATION
4
MODE Indicator
5
LOCK Indicator
TIMER
6
DISPLAY Indicator
DIGITAL DISPLAY area:
1
and, if in the TIMER mode, will show the ON and OFF settings of
the TIMER. If in the FAN mode, nothing is appeared.
TRANSMISSION Indicator:
2
when remote controller transmits signals to the indoor unit.
Press this button to initiate the auto-off time
When you press the recessed LOCK button, all
Push this button to activate/cancel the Turbo
Display Panel
TIMER ON OFF
Fig. 2
This area will show the set temperature
This indicator flashes one time
48
When push this button,
3
ON/OFF Indicator
4
OPERATION
MODE Indicator
7
FAN SPEED Indicator