emerio MC-122649.2 Mode D'emploi page 5

MC-122649.2
GENERAL DESCRIPTION
BEFORE USE
1. Remove the appliance from the packaging.
2. Take care when handling sharp blades.
3. Clean the appliance as described in section "cleaning and maintenance".
USE
1. Attach the blades on to blade support in the jar and pour in the food to be chopped. Hard food must be cut
into small pieces (about 2cm). Otherwise, the motor may block.
Note: This appliance is equipped with two sets of blades. Attach the two sets of blades together; rotate to fix
firmly by the groove on the blades shaft. Do not over tighten. The two sets of blades shall be crossed, not in
parallel.
1. Motor unit
2. Lid
3. Jar
4. Non-slip mat
5. Low (I) speed button
6. High (II) speed button
7. Stainless steel blade
8. Power cord storage
9. Blade support
✔
- 4 -
EN
✖