Securing Child
in the Enhanced child restraint
see images
-
21
25
Note
After the child is placed in the seat, check if the shoulder
harnesses are set to the correct height.
1. While pressing the harness adjustment button, pull completely the
two shoulder harnesses of the infant carrier.
2. Unlock the buckle of the harnesses by pressing the red button.
21
13
We recommend
using the full infant
insert while the
baby is under
60cm or until they
outgrow the insert.
Remove the body
portion of the
infant insert when
the infant's
shoulders no
longer fit
comfortably.
21
22
22
3. Place child into the infant carrier
and lock the buckle.
&
23
24
4. Tighten the shoulder harnesses by
pulling adjustment webbing.
23
24
28
25
25
14