Immersion Analysis With Translating Holder - Optika Italy OPTIGEM Serie Manuel D'utilisation

10.4 Immersion analysis with translating holder

• ST-203 + ST-204 + ST-207 are needed.
1. Install ST-207 as described in chapter 10.1. (Fig. 29)
2. Stack translating holder ST-204 and fix it with another spac-
er. (Fig. 30)
3. Rotate the microscope into horizontal position. (Fig. 31)
4. Put the immersion cell (ST-203) on the holder's plate. (Fig.
32)
Page 19
F ig. 29 F ig. 29
F ig. 30 F ig. 30
F ig. 31 F ig. 31
F ig. 32 F ig. 32