Turn Burner(S) Off; Selecting Cooktop Settings; How To Synchronize Left Elements - Monogram ZEU30 Manuel De L'utilisateur

USING YOUR COOKTOP

TURN BURNER(S) OFF

Touch On/Off pad for an individual burner or touch the All
Off pad.

SELECTING COOKTOP SETTINGS

Choose the element/burner that is best fit to the cookware
size. Each element/burner on your new cooktop has its
own power levels ranging from low to high. Power level
settings necessary for cooking will vary depending on the
cookware being used, the type and quantity of food, and
the desired outcome. In general use lower settings for
melting, holding and simmering and use higher settings for
heating quickly, searing and frying. When keeping foods
warm confirm selected setting is sufficient to maintain food
temperature above 140°F. Larger elements and elements
marked "Keep Warm" are not recommended for melting.

HOW TO SYNCHRONIZE LEFT ELEMENTS

To Turn On
Hold the Sync Burners pad for about half a second to
connect the two burners. Operate either element as
described on page 10 to adjust power level.
49-80825 Rev. 2
Hi is the highest power level, designed
for large quantity rapid cooking and
boiling. Hi will operate for a maximum
of 10 minutes. Hi may be repeated after
the initial 10 minute cycle by pressing
the + pad.
CAUTION: Do not place any cookware,
utensils or leave excess water spills on
control key pads. This may result in
unresponsive touch pads and turning
off the cooktop if present for several
seconds.
To Turn Off
1. Touch the On/Off pad on either burner to turn off the
Sync Burners.
or
2. Touch the Sync Burners to turn both burners off.
Hi
boiling quickly
frying
searing
reducing
simmering
holding
Low
melting
11