Servicing And Maintenance - Festool OF 1010 EQ Guide D'utilisation

A
B 15.1
Customer service and repair only
through manufacturer or service work-
shops: Please fi nd the nearest address
at: www.festoolusa.com/service
Use only original Festool spare parts!
EKAT
4
Order No. at:
5
3
2
www.festoolusa.com/service
1
together. They also can be interlocked atop Festool
15
CT dust extractors.
– To open the Systainer:
• Turn the T-loc [15.1] to the position
– To lock the Systainer:
• Turn the T-loc [15.1] to the position
– To connect two Systainers:
• Place one Systainer on the top of the other
(Fig. 15 A).
• Turn the T-loc [15.1] to the position
(Fig. 15 B).
The Systainers are connected and locked.
 A new generation Systainer is connectable on
top of a previous generation Systainer by the four
latches of the previous Systainer.

Servicing and maintenance

that requires opening of the motor or gear hous-
ing should only be carried out by an authorised
Customer Service Centre (name supplied by your
dealer)! Maintenance or repair work carried out by
an unauthorised person can lead to the wrong con-
nection of the power leads or other components,
which in turn can lead to accidents with serious
consequences.
the plug from the power supply socket before car-
rying out any maintenance or repair work on the
machine! Do not use compressed air to clean the
electrical tool! Do not try to clean parts inside the
machine in this way, as you could let foreign objects
in through the openings of the machine housing.
Certain cleaning agents and solvents
are harmful to plastic parts. Some of these are:
gasoline, carbonyl chloride, cleaning solutions con-
taining chlorine, ammonia and household cleaners
containing ammonia. To assure the circulation of
air, the cool air vents in the motor housing must
always be kept clear and clean.
This unit is fi tted with special, automatically dis-
connecting carbon brushes. If these become worn,
the current is automatically switched off and the
unit shuts down. In this case, take the unit to an
authorised Customer Service Centre and have the
carbon brushes changed.
13
Any maintenance or repair work
To prevent accidents, always remove
.
.
or