Accessories, Tools; Servicing And Maintenance - Festool OF 1400 EQ Guide D'utilisation

Accessories, tools

For safety reasons, only use original
Festool accessories and tools!
Festool offers a wide range of accessories for the
routers, e.g. to make wooden joints or drill rows
of holes.
The accessory and tool order number can be found
in the Festool catalogue or on the Internet under
www.festoolusa.com.
Systainer
Many Festool products are shipped in a unique
system container, called "Systainer". This provides
protection and storage for the tool and accessories.
The Systainers are stackable and can be interlocked
together. They also can be interlocked atop Festool
CT dust extractors.
A
B 14.1
– To open the Systainer:
•
Turn the T-loc [14.1] to the position
– To lock the Systainer:
•
Turn the T-loc [14.1] to the position
– To connect two Systainers:
•
Place one Systainer on the top of the other
(Fig. 14 A).
•
Turn the T-loc [14.1] to the position
(Fig. 14 B).
The Systainers are connected and locked.
 A new generation Systainer is connectable on
top of a previous generation Systainer by the four
latches of the previous Systainer.

Servicing and maintenance

that requires opening of the motor or gear hous-
ing should only be carried out by an authorised
Customer Service Centre (name supplied by your
dealer)! Maintenance or repair work carried out by
14 an unauthorised person can lead to the wrong con-
nection of the power leads or other components,
which in turn can lead to accidents with serious
consequences.
the plug from the power supply socket before car-
rying out any maintenance or repair work on the
machine! Do not use compressed air to clean the
electrical tool! Do not try to clean parts inside the
machine in this way, as you could let foreign objects
in through the openings of the machine housing.
Certain cleaning agents and solvents
are harmful to plastic parts. Some of these are:
gasoline, carbonyl chloride, cleaning solutions con-
taining chlorine, ammonia and household cleaners
containing ammonia.
 To assure the circulation of air, the cool air vents
in the motor housing must always be kept clear
and clean.
 This unit is fi tted with special, automatically
disconnecting carbon brushes. If these become
worn, the current is automatically switched off
and the unit shuts down. In this case, take the
unit to an authorised Customer Service Centre
and have the carbon brushes changed.
Customer service and repair only
through manufacturer or service work-
shops: Please fi nd the nearest address
at: www.festoolusa.com/service
EKAT
Use only original Festool spare parts!
4
Order No. at:
5
3
2
www.festoolusa.com/service
1
.
14
Any maintenance or repair work
To prevent accidents, always remove
.
or