Assembly - HOLZMANN MASCHINEN WB162L Mode D'emploi

8.3

Assembly

HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
1. Insert Connection Nuts (No.8) into holes at
end of frame brace (No.3). Make sure that
the slot on the nuts align horizontally with
the bolts (No.7).
2. Set the Frame brace (No.3) against a Leg
(No.4) and use the Hex Wrench (No 9) and
bolt (No.7) to fasten frame brace and leg
together.
3. Once both legs have been fastened to the
frame brace slide the shelf (No.2) inside.
4. Set the second frame brace (No.3) on, and fix
it with the connection nuts (No.8) and screw
(No.7) onto the leg (No.4). Make sure that
the shelf is placed inside the grooves of the
frame braces.
ASSEMBLY
12
WB 162 L