Fein KBM 50 Q Mode D'emploi page 12

OBJ_BUCH-0000000142-002.book Page 12 Monday, November 18, 2013 11:13 AM
en
12
Assembly instructions.
Before mounting or replacing cutting tool or accessories, pull the power plug.
WARNING
This preventive safety measure rules out the danger of injuries through acci-
dental starting of the power tool.
Mounting the spoke handle
(KBM 50 Q, KBM 50 U, KBM 65 U)
(figure 4).
The hub assembly can be mounted on either
side.
Loosen the screw using a hex key.
Remove the spoke handle.