Oki LD670 Mode D'emploi page 4

Description of Safety symbols displayed on the equipment
No. Symbol
1
2
3
4
5
6
"ON" (power)
To indicate connection to the mains, at least for
mains switches or their positions.
Stand-by
To identify the switch or switch position by means of
which part of the equipment is switched on in order
to bring it into the stand-by condition.
General warning/caution
To identify a general warning/caution.
Caution, hot surface
To indicate that the marked item can be hot and
should not be touched without taking care.
Direct current
To indicate on the rating plate that the equipment is
suitable for direct current only; to identify relevant
terminals.
Alternating current
To indicate on the rating plate that the equipment
is suitable for alternating current only; to identify
relevant terminals.
Description