Roll Paper Unit Installation Procedure - Oki LD670 Mode D'emploi

14-5. Roll Paper Unit Installation Procedure

When connecting or removing, turn OFF the power supply switches to the printer
and all devices connected to the printer before starting work, and remove the plug
for the AC adapter power supply cable from the outlet.
(1) Remove the connector cover at the rear of the printer.
Open the connector cover and warp the middle cover in the direction of the
arrow ①. Then, remove the rotary supporting point part of the connector cover
in the order of right side ② and the left side ③.
connector cover
middle cover
③
View after the connector cover is removed
①Open the middle cover in the
direction of the arrow.
208
②