Publicité
Les langues disponibles
Les langues disponibles
mode is a great starting point for mixing live events.
VOICE - This mode enhances vocal clarity and is best used when using a common dynamic
microphone connected directly into one of the CH inputs.
MONITOR - Use this mode when using the system as a stage monitor with a microphone, it will
balance and soften frequencies that are prone to feedback in a monitor mix.
(B)
BLUETOOTH
We have included True Wireless Stereo (TWS) Bluetoooth connectivity in the CVE. To PAIR with one
unit push the pair button once. The Blue light will begin flashing and your unit will pop up in your
Bluetooth devices list. To LINK 2 devices together in stereo you push and hold the first unit until it
begins flashing orange. Then push and hold the other unit's button until it flashes orange. After 10
seconds the units will LINK together into a Stereo pair. Once paired you can toggle between Stereo
& MONO by double tapping the pairing button while audio is playing.
Note: you cannot PAIR, UN-PAIR, or LINK units while audio is playing. See Manual & Application
Guide for more details.
(C)
INPUT 1 & INPUT 2
These are Balanced Combo Inputs allowing for balanced XLR/TRS cables to be inserted as LINE & MIC
levels.
(D)
LEVEL KNOBS
Channel 1 & 2 LEVEL knobs adjust the gain level on the respective input signal. The LEVEL is designed
to be used for a LINE level input as well as a MIC level input. Full counter-clockwise position (MIN)
to straight up (into the detent) is adjustment for LINE levels. Whereas from straight up to full
clockwise (MAX) position adjusts for MIC levels. The Bluetooth level knob is provided so that you
can adjust the level of the Bluetooth signals to match your other inputs as needed.
(E)
MIX OUTPUT
This connection is designed to provide an output which combines all channels including Bluetooth
together for connecting to another powered speaker or a recording device. This output is affected
by changes to each channels LEVEL knob.
CVE-10/12/15 Rear Panel
(A)
This mode selection button
allows you to toggle between
our 5 EQ presets. Listen to each
of these and determine what is
best for you.
LIVE PA - Best used for live music
sound reinforcement, it balances
and softens frequencies that can
dominate and feedback in a live
mix.
CLUB/DJ - This mode adds
definition to the high and low
frequencies, it is primarily used
for playback of EDM/Pop/Hip
Hop/etc music.
MIX / FLAT - A well balanced
overall speaker response with
deeper low end extentsion. This
5
DSP MODE SELECT
Publicité
