Meta System T.42 Notice D'installation page 14

• T.42 requires the electrical connection of the main power sup-
ply and of the key-operated positive pole.
• Take the signal of the battery's positive pole from a fuse in the
fuse box.
• Check the fi xed positive (+30) and the positive pole under the
panel are PERMANENT signals and NOT timed.
• Take the ground connection from the appropriate derivation
nodes.
Proceed with a traditional connection (stripping and crimping, in that case, solder the wires and provide to isolate with tape).
NOTE: do not use quick connection systems (e.g. cable taps)
1)
3)
ELECTRICAL CONNECTIONS
2)
4)
14
1) 2)
3)
5
6