stayer CPT 3000 E Instructions D'emploi page 26

OnlyforEC countries:
Do not dispose of power tools into household waste!
According the European Guideline 2012/19/
EC for Waste Electrical and Electronic
Equipment and its implementation into national
right,power tools that are no longer usable
must be collected separately and disposed of
in an environmentally correct manner.
Subject to change wlthout notlce.
Regulations
Technical Data
= Rated power input
= Load speed
= Disc Diameter
=Cutting capacity
45º
= Cutting capacity 90º
= Cutting capacity 45º
= Weight
L = Sound power level
WA
L = Sound pressure level
PA
= Vibration
The values givenarevalid for nominalvoltages [U]230/240
V-50/60 Hz - 110/120 V - 60Hz. For lower voltage and
models for specific countries, these values can vary.
Please observe the article number on the type plata of
your machine.The trade names of the individual machines
may vary.
NoiseNibration lnformation
Noise determined according to EN 62841-1
The typical sound pressure level of appliance determined
with a filter A product are: Sound pressure level 99 dB(A);
sound power level 100 dB(A). Tolerance K=3 dB.
Wear hearing protection!
Total vibration values (vector sum of three
directions)
determined according to EN 62841-1: Sanding drywal
ah=4 m/s2, K= 1,5 m/s2.
The vibration emission level given in this information sheet
has been measured in accordance with a standardised
test given in EN 62841-1 and may be used to compare
one tool with another. lt may be used for a preliminary
assessment of exposure.
The declared vibration emission level represents the main
applications of the tool. However if the tool is used for
different applications,with different accessories or poorly
maintained, the vibration emission may differ.
This may significantly increase the exposure leveloverthe
totalworking period.
ENGLISH
26
26