Sewing Light; Oiling - ELNA Sew Green Mode D'emploi

Sewing Light

The sewing light is located behind the face plate.
To change the bulb, take the face plate off the sewing
machine by removing the setscrew.
Unplug the power supply before changing the bulb.
Do not dismantle the machine other than explained
in this manual.
To remove .... Push and twist to the left.
To replace .... Push and twist to the right.
CAUTION:
The bulb could be HOT. Protect your fingers
when handle it.

Oiling

Unplug the machine. Remove screw cap, screw
and face plate.
Apply a few drops of sewing machine oil to the
points indicated by arrows in illustrations.
Machine should be oiled two or three times a year
or more depending on frequency of use.
38