Meister MAS18V Traduction Du Manuel D'utilisation Original page 64

h) Keep handles and grips dry,
clean, and free from oil and
grease. Slippery handles and
grips do not allow safe operation
and control of the power tool in
unforeseen situations.
5) Battery use and care
a) When recharging a battery, only
use chargers that have been rec­
ommended by the manufactur­
er. With a charger that is designed
for use with a particular type of
rechargeable battery, there is a
risk of fire if it is used with other
rechargeable battery types.
b) Only use the rechargeable bat­
teries intended for the power
tools. The use of other batteries
may lead to injury and risk of fire.
c) When not in use, keep the
rechargeable battery away from
paper clips, coins, keys, nails,
screws or other small metal­
lic objects that may bridge the
contacts. A short-circuit between
the battery contacts may result in
burns or fire.
d) Fluid may escape from the
rechargeable battery if it is used
incorrectly. Avoid all contact with
this. In the event of accidental
contact, rinse with water. If this
fluid should get into the eyes, you
should also seek medical assis­
tance. Leaking battery fluid may
result in skin irritations or burns.
e) Do not use a damaged or mod­
64
ified battery. Damaged or modi-
MW-5451280-Bedien-2008.indd 64 MW-5451280-Bedien-2008.indd 64
fied batteries may behave unpre-
dictably and lead to fire, explosion
or personal injury.
f) Do not expose a battery to fire
or high temperatures. Fire or
temperatures over 130 ° C can
cause an explosion.
g) Follow all charging instructions
and never charge the battery
or the cordless tool outside the
temperature range specified
in the operating instructions.
Incorrect charging or charging
outside the permitted temperature
range can destroy the battery and
increase the risk of fire.
6) Service
a) Have your power tool serviced
by a qualified technician using
only original spare parts. This
ensures that the safety of your
power tool is maintained.
b) Never service damaged bat­
teries. All battery maintenance
should be performed by the man-
ufacturer or by authorised service
centres only.
7) Safety instructions for drills
Safety instructions for all work
a) Hold the tool using the insulat­
ed handle surfaces when carry­
ing out work during which the
insertion tool might touch hid­
den power cables or its own
power supply cable. Contact
with a live cable can also apply
26.08.20 09:07 26.08.20 09:07