Meister MAS18V Traduction Du Manuel D'utilisation Original page 63

control of the power tool in the
event of unexpected situations.
f) Wear suitable clothing. Do not
wear loose clothing or jewellery.
Keep hair and clothing away
from moving parts. Loose cloth-
ing, jewellery or long hair may be
caught by moving parts.
g) If dust extraction and collec­
tion systems are provided,
ensure that they are connected
and used correctly. Use of dust
extraction systems can reduce
dust related hazards.
h) Do not assume a false sense
of security and do not overstep
the safety rules for power tools,
even if you are familiar with the
power tool after many uses.
Careless action can lead to seri-
ous injuries within split seconds.
4) Use and handling of the power
tool
a) Do not overload your power
tool. Use the appropriate power
tool for the task in hand. The
correct power tool will do the job
better and safer in the specified
performance range.
b) Do not use the power tool if the
switch is defective. Any power
tool that cannot be switched on
or off is dangerous and must be
repaired.
c) Pull the plug out of the sock­
et and/or remove a removable
battery pack before making any
MW-5451280-Bedien-2008.indd 63 MW-5451280-Bedien-2008.indd 63
changes to the device settings,
changing insertion tools or put­
ting the power tool down. This
precautionary safety measure pre-
vents the risk of the power tool
starting up accidentally.
d) Keep power tools not in use
away of reach by children.
Do not anyone to operate the
power tool who is not famil­
iar with it, or who has not read
these instructions. Power tools
are dangerous when used by
inexperienced persons.
e) Look after your power tools and
tool inserts carefully. Check
whether moving parts function
properly and do not bind, check
whether parts are broken or
damaged in such a way that the
functionality of the power tool
is affected. Have any damaged
parts repaired before using
the power tool. Many accidents
are caused by poorly maintained
power tools.
f) Keep cutting tools sharp and
clean. Properly maintained cutting
tools with sharp cutting edges are
less likely to jam and are easier to
control.
g) Use the power tool, insertion
tool, insertion tools, etc. in
accordance with these instruc­
tions. Take the working condi­
tions and the task to be com­
pleted into account. Using the
power tool for purposes for which
it was not intended may result in a
hazardous situation.
63
26.08.20 09:07 26.08.20 09:07