Publicité
Les langues disponibles
Les langues disponibles
18
SET-UP INSTRUCTIONS /RESISTANCE
ADJUSTMENT / FOLDING IN & OUT
STEP 7
Attach the handlebars (C) to main frame (A) with 4 M6x12 bolts
(N) and 4 washers 6mm (T). Be careful not to damage any cables.
Now fix the computer (U) to the handlebars (C) using 2 screws
(V) and connect the cable ends (1) to (2) and (3) to (4) as shown
below.
RESISTANCE ADJUSTMENT
The resistance adjustment knob offers
the possibility to adjust the
pedalling resistance in 8 steps.
FOLDING IN & OUT
The ball head plug (L) secures the unit either in the unfolded (ready for training) position
A
or else in the folded
(ready for storage) position B. To fold or unfold the unit, pull the ball head plug (L) out of the current position and
insert it into the other hole after folding or unfolding.
A
B
Publicité
Chapitres
