Skandika Foldaway X-1200 Mode D'emploi page 17

STEP 5
Attach the seat post (D) to the backrest (G) with 2 bolts M8x45 (K), 2 washers 8mm (Q) and 2 nuts M8 (P).
STEP 6
Slide the seat post (D) into the main frame (A), align the holes with each other and secure the post with the quick
adjuster (F). The seat height can be adjusted according to your personal needs - however, make sure that you do
not go below or exceed the minimum or maximum setting (insertion depth max. 146 mm / min. 44 mm)!
17
SET-UP INSTRUCTIONS