HUUM UKU GSM Instructions D'installation Et D'utilisation page 14

GENERAL SAFETY INFORMATION FOR THE USER
• If thermal protection (130° C) has tripped, check the sauna's con-
dition and safety. If the heat sensor with overheating protection
is to be replaced, contact the manufacturer support@huum.eu.
• For unique problems that are not covered in the installation
manual, contact your vendor to ensure safety.
• For the safe use of the sauna's control device, it is not permitted
to alter or rebuild the device.
• The manufacturer has the right to make technical changes to the
device.
PURPOSEFUL USE
• Make sure that there are no objects on the heater. Even non-
combustible items may cause overheating, resulting in a fire hazard.
• Close the steam room's door for the time the sauna is heated.
Heating will not work with an open door.
• The 18 kW control console can be used with only three heating
circuits with a maximum heating power of 6 kW per circuit.
• This device is not intended to be used by people with limited
physical, sensory or mental abilities (including children) or by
people with lack of experience and/or knowledge, unless they are
supervised by a person responsible for their safety or they have
received instructions from such a person.
• Ensure that children do not play with the device.
• For safety reasons, turn off the sauna's circuit breaker when the
sauna is not being used.
• To use the remote control, check the heater condition and
remove any items from the heater. Make sure steam room is safe
and close the door.
• Old devices contain recyclable materials. Therefore, do not throw
old devices into the household waste.
• Turn off the sauna's circuit breaker from the switchboard if you do
not intend to use the sauna for an extended period.
14