Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
settings menu. When you use the mobile app, it is possible to
choose the heating period.
•
After the heating ends or after using the button the control
console will turn off.
•
The number displayed in the upper right corner of the screen is
the target temperature of the sauna. The current temperature is
displayed in the centre of the screen. Turn the knob to adjust the
temperature.
•
To adjust the heater's automatic steam function, turn the button
while pressed. In the lower left corner, the setting is shown from 1
to 10.
•
To get in the settings menu, press and hold the button for 10
seconds.
•
From the settings menu it is possible to select between C
(Celsius) and F (Fahrenheit).
•
You can select between smart and simple heating algorithms:
With a simple heating algorithm, all of the heating elements
will be turned off as soon as the target temperature is reached.
With a smart algorithm, the heating elements start turning off
gradually one by one before the target temperature is reached.
This helps to save power, especially with heaters using 50+ kg
stones. NB! Not to be used with heaters that have less than three
heating elements
•
Vent/light - Turning this functionality on, will turn on whatever
appliance is connected to the LN LL outputs for the selected time
(10, 15, 20 min) whenever the door is opened.
Child lock
•
The child lock function can be turned on from the settings menu.
•
The child lock will automatically turn on when the screen of the
control console turns off.
•
When the child lock is on, hold down the button and turn it by
quarter to the right, then back to the beginning, next turn by
quarter to the left and back to the beginning to activate the screen.
12
Publicité
Table des Matières
