Publicité
Les langues disponibles
Les langues disponibles
STATUS ICONS
When the icons are green, the machine works normally. When they are yellow, the operation is
abnormal.
Blower Motor
Shaft motor
Hopper motor
Temp sensor unconnected
Temp overheat
Tip over
Lack of time
PCB too hot
Sub PCB connected
2/3 channel output
RDM FUNCTION
RDM allows a console with RDM function to define DMX address and starting temperature of
spark jet.
DMX OPERATION
Channel
DMX address
CH1
0-10
11-255
CH2
0-200
11-39
56-200
240-255
CH3
0-255
Safety channel 0-200
201-255
INITIAL SETTING
Setting
Set temperature
DMX address
DMX channel mode
Density
Safety address
Tilt sensor
Restore defaults
TFT backlight
Auto heating
Turn on power.
Check the status icons. If the icons are yellow, operation is abnormal. Please ask a professional to
check and repair the machine.
The sparking temperature of the machine is the factory default temperature. The machine will
EN
6
Function
Stop
Fountain height 1-25
Pre-heat off
Emergency stop
Clear material
Pre-heat on
Density adjustment (0 is maximum density)
Control off
Control On
Range
400-620
1-512
3/2
30-100
0-512
ON/OFF
YES/NO
ON/OFF
ON/OFF
Default
560
1
3
100
OFF (0)
ON
NO
ON
ON
© Copyright LOTRONIC 2022
Publicité
