Maintenance Schedule; Required Tools - EWM KM 120-S Notice D'utilisation

Operating manual

Maintenance schedule

Period
10 minutes after first
start-up
as needed
before each use
every 50 hours

Required tools

You will need the following tools for maintenance of the hedge trimmer:
• Torque spanner
-
-
-
-
-
-
• Wrench set
58
Maintenance tasks
Tightening torques for bolts and
nuts
Hedge trimmer
Sections
Knives
Guards
Safety fingers
Wear plates
Knife head
Hedge trimmer
Pro-drive knife drive
Head bearing
Tightening torques for bolts and
nuts
Tightening torque 115 Nm for bolts M12 x 40 (Pro-drive knife drive)
Tightening torque 115 Nm for bolts M12 x 30 (motor mount and Pro-drive
knife drive)
Tightening torque 48 Nm for nuts M10 (guard)
Tightening torque 15 Nm for bolts M6 x 22, M6 x 18 (knife connection) and
nuts M6 (sections)
Tightening torque 81 Nm for bolts M10 x 35 (head bearing)
Tightening torque > 72 Nm for bolt M10 x 45 (knife head lug)
X
X
X
X
X
X
X
X
X
X
X
X
A018H