Maintenance; Possible Faults - Haverland ES4 Mode D'emploi

7) MAINTENANCE

This heat emitter does not require any special maintenance.
Clean off any dust using a soft dry cloth WITH THE EMITTER SWITCHED OFF AND COLD.
SOLVENTS OR ABRASIVE PRODUCTS MUST NEVER BE USED.
It is recommended that the unit surfaces be cleaned of dust and any other type of dirt at the beginning of the heating season (ALWAYS
SWITCHED OFF AND COLD).

8) POSSIBLE FAULTS

- Ensure that mains power is reaching the unit, it is switched on and "Standby" has been pressed.
- Verify that the temperature set by the thermostat is higher than the current room temperature.
If this does not resolve the problem, then please contact an authorized HAVERLAND Technical Assistance Service.
IMPORTANT INFORMATION ON CORRECTLY DISPOSING OF THE PRODUCT IN ACCORDANCE WITH DIRECTIVE 2002/96/EC
At the end of its useful service life, this product must not be disposed of as normal household waste.
It must be taken to a special local municipal centre for the collection of special waste or to concessionary that provides such as service.
The separate disposal of domestic appliances avoids any negative consequences for the environment and for public health that could derive from inadequate disposal and also
allow the recovery of the component materials, thus producing significant energy and resource savings. In order to show the need to dispose the domestic appliance separately,
this product is marked with a wheeled rubbish bin that is crossed out.
THIS APPLIANCE COMPLIES WITH DIRECTIVE 89/336/EEC ON THE SUPPRESSION OF RADIO INTERFERENCE.
El fabricante se reserva el derecho de realizar cualquier modificación sin previo aviso.
The manufacturer saves himself the right to realize any modification without previous notice.
Le fabricant se réserve le droit de réaliser n'importe quelle modification sans un avis préalable.
O fabricante reserva a direita fazer toda a modificação sem aviso precedente.
es_d2009-v01_amor@2009
17
EN