Important - shark Steam & Spray SS460 Série Manuel Du Propriétaire

fig. 2
fig. 1
IMPORTANT: Always make sure that the Shark
& Spray Pro Mop is UNPLUGGED from the wall. It is
™
recommended to remove the batteries while the unit is
not in use. Use ONLY Cleansers supplied by Shark
addition of other chemicals or cleaning solutions may
damage the appliance, void the warranty and could be
unsafe for you and your family.
1
Insert the top part of the pole into the bottom part of
the pole. Push the two parts together until you hear
it "click" into place. (fig. 1)
2
Remove the battery cover and insert the 4 AA
batteries. Replace the battery cover. (fig. 2)
12 1-800-798-7398
AA
AA
AA
AA
fig. 3
3
Steam
®
. The
®
4
Connect the body of the unit with the selected
mop head. If selecting the steam head, you have
the option of filling the steam head at the sink or
using the fill flask to fill the water tank. Plug into the
electrical outlet. (fig. 3)
NOTE: To prolong the life of your Shark
Spray Pro Mop, we recommend using distilled water.
™
Insert the selected cleanser into the unit. Push it
down to make sure that it is well inserted. You will
hear an audible "click" when the cleanser bottle is
inserted properly. (fig. 4)
NOTE: To remove the Cleanser bottle, hold it and
pull it up.
fig. 4
Steam &
®