Kapro Prolaser 3D All-Lines 883G Manuel D'utilisation page 12

Working in Pulse mode with a detector:
For outdoor work under direct sunlight, or bright conditions,
and for extended indoor ranges up to 70 meters, use the
pulse mode with a Detector. When the pulse mode is
activated the laser beams will flash at a very high frequency
(Invisible to the human eye). This will allow the detector to
detect the laser beams.
1. The pulse mode can be activated both in Automatic and
Manual mode.
2. Turn on the laser level (to the required mode).
3. Press the Pulse mode button (c) to activate it. The Pulse
mode indicator (d) will turn on. Visually the intensity of the
beam will be a bit reduced.
4. Turn on the detector and search the laser beam.
5. You can choose a different beam, by pressing on the
beam selector button (a), while you are in Pulse Mode.
6. To switch off the Pulse Mode, press the Pulse mode
button (c), the Pulse mode indicator (d) will turn off.
12