Main Menu - Televes Avant 3 Manuel D'instructions

User manual

4.1.- MAIN MENU

From now on, by pressing quickly on
can go through the main menus, in this
order: Inputs, Filter 1, ..., Filter 5 and VHF
Filter.
Note:
If you want to modify the menu language
before beginning the configuration of the
device, you must go to the "language"
menu. To do so, press
from the Input menu to access the
Extended menu and then use
select the language. Finally press
press) to save the changes.
For further information, see "Extended
menu = > Language selection".
1.- Configuration of inputs
you
The first menu is the "Inputs" menu. The
buttons for this menu are as follows:
- These go through the menu options:
5-0, 2-3.
- (short press) - This positions the cursor
over each of the parameters that can be
modified
(long press)
- (long press) - This accesses the exten-
ded menu (language).
or to
- (short press) - This accesses the next
(long
main menu.
- (long press) - This saves the parame-
ters.
To modify a value, press
will begin flashing. You can change the
value using
I
NPUT
U1 | U2
[2] |[3]
, and the value
or .
I S
S
NPUT
U1 | U2
| |
[5] |[0]
48
2.- Filter programming
By pressing you can access the second
menu, Filter programming. The buttons for
this menu are as follows:
- This selects the lower and upper
channels of the filter.
- (short press) - Cursor position.
- (long press) - Nothing.
- (short press) - This goes onto the next
menu.
- (long press) - This saves the parame-
ters.
FILTER 1
__
Press (short press) to enable the first
channel of Filter 1. Use
the lower channel of the filter. Press
(short press) to enable the upper channel of
the filter. Use and to select the upper
channel of the filter.
Avant 3
and to select