Troubleshooting - Cartrend 50275 Notice D'instructions Originale

9. Trouble-
shooting
Problem
50275_Schlagschrauber_Expert_BA_171026.indd 34
Problem
The tool doesn't
work.
Unusual noises or
vibrations.
Socket (8) cannot
be placed on bolts
or nuts.
34
Cause Solution
The power plug Correctly connect the
(2) is not correctly power plug (2) to a
connected to a power outlet.
power outlet.
The power outlet Ensure that the
does not supply power outlet supplies
electricity. electricity.
The socket (8) is not Correctly insert the
correctly inserted socket (8).
into the tool.
The tool screw is Tighten all tool screws.
loose.
The tool or motor Have the tool repaired
must be lubricated by an authorized service
or repaired. centre.
The selected socket Select a suitable socket
(8) is not suited (8) for the specific bolt/
for the mounting nut.
material (bolt, nut).
26.10.17 14:01