Cleaning And Care - Cartrend 50275 Notice D'instructions Originale

7. Cleaning
and care
50275_Schlagschrauber_Expert_BA_171026.indd 32
Notes:
• Ensure strict compliance with the manufacturer's
information concerning torque. No guideline values exist
for aluminium or steel rims.
• Use a torque wrench to inspect the proper torque of the
wheel nuts/screws prior to starting the vehicle.
• After driving 30 – 50 km, use a torque wrench to inspect
the proper torque of the wheel nuts/screws.
Warning! To reduce the risk of injuries, always separate the
tool from the power network prior to cleaning or care. Never
repair the tool yourself..
• Disconnect the power plug (2) from the power outlet.
• Remove the socket (8) from the tool mount (6).
• Clean dust and dirt from the ventilation slots.
• Use a mild soap and a damp cloth to clean the casing and the handle
(1) of the impact wrench. Always keep the handle free from oil and
lubricant.
• We recommend storing the tool and accessories in the carrying case
(9), in a dry and clean location, outside of the reach of children.
• If the power cord of this device is damaged, it must be replaced by
the manufacturer, the manufacturer's customer service, or a similarly
qualified person in order to avoid safety risks.
Attention!
• Do not use cleaning agents, alcohol, or solvents to clean
the tool as these could damage the plastic parts and other
insulated parts of the tool.
• Never use flammable or combustible solvents near the
tool!
• Do not submerge the tool in liquids. Ensure that no liquids
may enter into the tool.
32
26.10.17 14:01