Attaching Adapter Plate To Screen With Vesa 200 X 100 Or 200 X 200 Mounting Pattern - PEERLESS Paramount PC930A Installation Et Montage

Attaching Adapter Plate to Screen with VESA 200 x 100 or
200 x 200 Mounting Pattern
Attach tilt bracket (F) to adapter plate (R) using four
6
M5 x 6 mm screws (S) and four #10 washers (T) as
shown.
• If screws don't get three complete turns in the screen inserts or if screws bottom out and adapter plate is still not
tightly secured, damage may occur to screen or product may fail.
FOR VESA 200 x 100 MOUNTING PATTERN:
6-1
Choose hole pattern as shown below. Attach adapter
plate (R) to back of screen using four M4 x 10 mm
screws (M) or M4 x 12 mm screws (N) as shown
below.
*Note: If screw (M or N) gets less than three threads
of engagement, attach adapter plate (R) to back of
screen using four M4 x 20 mm screws (O) and four
spacers (P) as indicated below.
R
M, N or O *For screens with a hole
pattern in a pocket, spacers
go between adapter plate and
screen when used with
M4 x 20 mm screws (O).
F
S
WARNING
FOR VESA 200 x 200 MOUNTING PATTERN:
Choose hole pattern as shown below. Attach adapter
plate (R) to back of screen using four M6 x 12 mm
screws (U) as shown below.
*Note: If screw (U) gets less than three threads of
engagement, attach adapter plate (R) to back of
screen using four M6 x 20 mm screws (V). If
screw (V) gets less than three threads of engage-
ment, use four M6 x 30 mm screws (W).
P
R
T
R
U, V or W