Safety Notes - meibes BigFixLock Documentation Technique Mise En Service

1. Safety notes

Read these instructions carefully before assembling. The assembly and commissioning of the entire unit
may only be carried out by an authorised specialist. Before starting work, familiarise yourself with all parts and their operation.
In order to prevent accidents and damage to people and property, please follow these safety instructions closely
Meibes - large distributor - modular system
The assembly location must be frost-proof and easily accessible. In order to ensure that the system is well positioned, the floor must be
flat with the feet firmly anchored into it. The erection site/area must meet the regional and local fire safety requirements.
Regulations / Directives
Observe the applicable accident prevention regulations, environmental legislation and statutory rules for the assembly, installation and
operation. Furthermore, follow the relevant DIN, EN, DVGW, VDI and VDE (incl. lightning protection) directives and all of the current national
standards, laws and directives which apply.
Before commissioning
Check the product for completeness. Immediately make a note of transport damage and other grounds for complaint and before assembly,
inform our office! The result of the initial commissioning should be recorded in a log. In the case of non-compliance, claims cannot be
made for damages or malfunctions that have arisen under the warranty that is provided by Meibes.
• Read the assembly instructions before use
• Risk of cuts
• Risk of being crushing
• Risk of increased temperature
• Risk of electrical voltage
• Risk of items falling during installation
33